0zł

Velosipēdu riteņu komplekts Fulcrum Wind 55 DB 2WF C19 AFS front HH12 - rear HH12/142 with DRP

Produkta kods: RW55-DFR22AC

Daļas izmērs:

Produkta pieejamība tiks parādīta, kad būs izvēlēts produkta izmērs
Jautāt par produktu
close
Izziņa par preci
 
Apraksts - Velosipēdu riteņu komplekts Fulcrum Wind 55 DB 2WF C19 AFS front HH12 - rear HH12/142 with DRP
Since 2004, Fulcrum has developed wheels for bikes with a sole, constant objective in mind: to deliver the best performance that modern technology can offer. A large part of this task is the responsibility of the R&D division engineering team in Italy. However, if you want to create ever faster wheels, you cannot focus solely on test bench results, you also need to gain feedback from top riders and cycling fans worldwide. And this is what we do: we race our bikes during lunch breaks or after work, we test our wheels by pushing them to the max, fitting them to the bikes of world champions, listening to suggestions and comments from the world of racing and from our clients.

The power of aerodynamics. In describing a racing bike wheel like Wind 55 DB, you start with aerodynamics: it's time to try out on your bike how a finished and optimised profile down to the finest detail is able to make the difference.The 55 mm full carbon unidirectional rim, a full 27 mm wide, is the result of an endless cycle of tests, wind tunnel analyses and laboratory finishing. Then on the road, with the main objective of reducing the effect of side winds on the ride as much as possible. And this is what you notice when you choose to race on Wind 55 DB: it cuts through the wind, guarantees stability and consequently very high average speeds without excess effort. Completing this package id the 2-Way Fit, 19-mm internal channel, designed to offer the best support for tubeless tires and designed to best match the 25 and 28 mm sizes with the wide rim profile. Thanks to the Mo-Mag technology, no conversion will be necessary, the wheel is ready for use even without an inner tube. If "Aerodynamics" is the first word that comes to mind to describe your new set of wheels, perhaps you should think of Wind as the first choice.

  • Tyre type: 2-Way fit (for clincher and tubeless)
  • Tyre size: 28"
  • Discipline: Road / Triathlon
  • ASTM category: 2
  • Weight (Front+Rear): 1680 g
  • Rim material: Carbon
  • Rim material details: Full carbon, "UD" - carbon fiber finishing
  • Profile height: High
  • Rim height: 55 mm
  • Rim width: 27 mm
  • Inner rim width (channel): 19 mm
  • Tyre width: From 23 mm to 50 mm
  • Braking system: Disc brake
  • Braking surface/brakes options: AFS
  • Front axle compatibility: HH12-100
  • Rear axle compatibility: HH12-142
  • Front wheel spokes: 24 (16 left - 8 right)
  • Rear wheel spokes: 24 (8 left - 16 right)
  • Spokes material: Stainless steel, double butted
  • Spokes profile: Rounded, straight pull
  • Nipples: Aluminum
  • Front hub: Aluminum, Aluminum flanges
  • Rear hub: Aluminum, Aluminum flanges
  • Bearings: Sealed cartridge bearings
  • Others: Aluminum Axle
  • Weight limit (front+rear): 109 kg (Cyclist)
  • Freehub (OPTIONAL): SHIMANO HG11 (8/9/10/11-speed) OR Campagnolo N3W OR SRAM XDR

TECHNOLOGY

2-WAY FIT (ROAD): We have developed our 2-Way Fit technology to ensure the perfect compatibility of our tubeless rims with normal clincher types and tubes. 2-Way Fitroad bike wheels are perfectly multipurpose for tackling every situation. Thanks to a special impression in the valve area, the tubes are fitted with the maximum precision while keeping the tube perfectly stable inside the tyre. Housing the valve for tubeless tyres is also risk-free, with the unquestionable advantage that there are never any air infiltrations caused by non-ideal positioning when fitting.

RDB RIM DYNAMIC BALANCE: The concept is simple and elegant: balance the weight of the gasket, with an item of similar weight placed on the exact opposite side. For top models, this is obtained by a special operation on the section of the rim opposite the rim joint. For entry-level models, Dynamic Balance is obtained by using two oversized spokes in the section opposite the joint. The result is a wheel with perfectly balanced rotational dynamics.

MOMAG: A magnet and lots of ingenuity. This was what led to the patent for the well-tested “Mounting Magnet” system, or MoMag.

F.I.C. FULCRUM IDENTIFICATION CARD - 100% HANDMADE QUALITY: Right from its inception Fulcrum has been marked by feature that continues to this day: that is to design, prototype and industrialise all the wheels characterised by the red “F”. Indeed these take shape inside of the R&D, the leading-edge department that represents the beating heart of the Italian company. Every single component of the wheel, the materials chosen and the technologies applied are the tangible result of the effort that Fulcrum makes every day to give you maximum performance and reliability.

TRACEABILITY: A guarantee of quality. The keyword for our products is: traceable. If you find a little label attached to any Fulcrum product, do not remove it. It will provide you a guarantee in case of an ascertained defectiveness of a production batch, and so the component needed or wheel will be traceable. All this because, devoted to its mission, Fulcrum demands the absolute perfection and safety for its customers.

ANTI-ROTATION SYSTEM: This new system raises the concept of spoking to a new level of performance for road bike and triathlon wheels ( and mtb too) The Fulcrum engineers have redesigned the spokes and the hub housings to create a solid and unmoveable whole. The result is that the spokes a) will never lose their initial tension, thus keeping the wheel perfectly reactive and centred b) will remain in the position that have been studied in the wind tunnel tests to ensure the best aerodynamic penetration possible.

AFS AXLE SYSTEM: The Axial Fixing System is the solution developed by Fulcrum to fix the disc brake to the hub. The constraint granted by the butt area of the release mechanism, greater than in familiar standard ones, makes it possible to obtain greater structural rigidity and therefore more precise and powerful braking.

WIDE RIM TECH: Fulcrum’s R&D department, following requests from the competition circuit, has worked to create rims that are wider than before, about 4 mm or more than previously. This technical choice provides an ideal basis for 25/28mm tyres, the sizes currently popular. This ensures stability, excellent handling and superior comfort.

RIM FULL CARBON TECHNOLOGY: Full carbon Fulcrum rims are built using combinations, developed in the laboratory, of different types of fibre, including UD and the famous 90-degree 3K of models at the top of our range. To build them we developed a special HTG (high transition grade) resin, whose glass transition point is at a higher temperature than any other fibre used in the bicycle industry. This gives incomparable performance when braking.

DISC SPECIFIC RIM: compatible only with disc brakes

UNDRILLED RIM BED: No holes on the bridge connector means that the rim is uniform at every point, free from critical areas subject to stress. The advantages are immediately clear: less weight, longer lasting rims, greater resistance to fatigue, the possibility of giving the spokes more tension and more stiffness which, in terms of performance, means improved responsiveness and acceleration.

Produkta detaļas
Preces nosaukums
Velosipēdu riteņu komplekts Fulcrum Wind 55 DB 2WF C19 AFS front HH12 - rear HH12/142 with DRP
Produkta kods
RW55-DFR22AC
Ražotājs
Fulcrum
Svītrkods
8057017985983
Atsauksmes par - Velosipēdu riteņu komplekts Fulcrum Wind 55 DB 2WF C19 AFS front HH12 - rear HH12/142 with DRP
Uzrakstiet atsauksmi

Velosipēdu riteņu komplekts Fulcrum Wind 55 DB 2WF C19 AFS front HH12 - rear HH12/142 with DRP

Uzrakstiet atsauksmi